Mud pump crankshaft assembly



CRANKSHAFT  AH130102020400
CRANK SHAFT GH3161-02.08.00
CRANK SHAFT 1200003987
Cylinder assy GH3161-05.01.00（RS1 1309.02.01.00）

The crankshaft is an alloy steel casting. Large gear rings, connecting rods, bearings, etc. are mounted on the crankshaft. The tooth shape of the large ring gear is a herringbone tooth, and the inner hole of the large ring is interference-fitted with the crankshaft and fastened with bolts and anti-loose nuts. The connecting rod end is a herringbone tooth, and the inner ring of the large ring is interference-fitted with the crankshaft and fastened with bolts and anti-loose nuts. The connecting rod end is a herringbone tooth, and the inner ring of the large ring is interference-fitted with the crankshaft and fastened with bolts and anti-loose nuts. The connecting rod ends are respectively mounted on the three eccentric turns of the curved piece by a single row of short cylindrical roller bearings, and the small end is mounted on the cross pin by the double row long cylindrical roller bearing. Both ends of the curved line are double row radial spherical roller bearings.

AH10010102080001
AH10010202040001
AH08010102080001
AH08010202040001
AH05010102080001
AH05010202040001
AH130102020400
AH13010102080001
AH13010202040001
AH050102020400
AH1001010200
AH1001020200
AH0801010200
AH0801020200
AH0501010200
AH0501020200
AH1301010200
AH1301020200
AH1601010100
AH1601020100

上一篇：没有了

下一篇：Mud pump ring gear